Monopour | BS Specialist Products

Concrete Repair

BSSP 10 Fosroc 18 Tarmac 4 Weber 7 DCP 6 Flexcrete 10 Ultracrete 3 Sika 4 Parex 5 Nufins 4 Ardex 6 Ronacrete 14

Concrete Treatments & Coatings

Surface Treatments 14 Concrete Coatings 15

Corrosion Prevention and Sealing

Corrosion Prevention 5 Viscotaq 5 Denso 4 Filoform 3

Expansion Joint Fillers

Gabion Baskets & Gabion Mattresses

Geotechnical

Ground Gas Protection

Monarflex 2 Visqueen 12 Juta 16 Cordek 5 RIW 7 Corden EPS

Grouts, Anchors & Formwork

Formwork 15 Grouts & Anchors 19

Highway Repair

Reinforcement Accessories

Wire Spacers 3 Concrete Spacers 5 Plastic Spacers 1 Tying Wire 2 Slab Accessories 5 Bolt boxes 3 Holding down bolts 1

Sealants & Adhesives

Adhesives 5 Arbo Sealants 6 BSSP Sealants 2 Everbuild Sealants 11 Expanding Foam 5 Sika Sealants 6 Fosroc Sealants 11

Site Consumables

Streetscape

Parex 4 Instarmac 3 Larsen 3 Steintec 3

Structural Waterproofing

Monopour is an advanced polymer modified, shrinkage compensated, waterproof cementitious repair mortar which is designed for large areas of concrete repair and heavy duty applications beneath base plates, plinths and stanchion bases. It is available in two grades – Monopour PG which is a free-flowing grout and Monopour PC6 which is a micro-concrete. It is ideal for pouring, pumping or trowelling and cures rapidly, developing high early and long-term strength and allowing quick reinstatement.

Monopour PG grout has a maximum aggregate size of 2.5mm for application thicknesses up to 100mm whilst Monopour PC6 micro-concrete has a maximum aggregate size of 6mm for larger depths in excess of 50mm.

View/Download Datasheet (TDS-Monopour.pdf)

Advantages

Incorporates the latest proven cement chemistry, microsilica and styrene acrylic copolymer technology.
Pre-packaged material only requiring mixing with clean water on-site to give the ideal consistency for pouring, pumping or trowelling.
Available in two grades – a free-flowing grout and a micro-concrete.
Rapid curing with high early strength development.
Outstanding protection from the ingress of acid gases, moisture and chlorides.
Non-shrink, free flowing material – the aggregate shape and grading have been specially chosen to facilitate. mixing and to maximise flow and minimise the risk of segregation and bleeding.
Eradicates risk of staining or degradation resulting from corrosion.
All admixtures are chloride-free with strictly controlled alkali content.
Easily overcoated with specialist membranes to provide further protection and aesthetic quality.

Compliance

Fully complies with the Highways Agency Standard BD 27/86 for the repair of Highway Structures.

Specification Clause

The repair mortar shall be a free-flowing, polymer modified, shrinkage compensated, waterproof cementitious repair mortar. It shall be fully compliant with Highways Agency Standard BD 27/86 for the repair of Highway Structures and shall comply with the following performance specification:

Bond strength after 28 days of >50 MPa/mm² in accordance with BS 6319 Part 4
Compressive strength at 20°C of at least 15 MPa in 1 day and 60 MPa in 28 days.