Marine Mortar S | BS Specialist Products

Concrete Repair

BSSP 10 Fosroc 18 Tarmac 4 Weber 7 DCP 6 Flexcrete 10 Ultracrete 3 Sika 4 Parex 5 Nufins 4 Ardex 6 Ronacrete 14

Concrete Treatments & Coatings

Surface Treatments 14 Concrete Coatings 15

Corrosion Prevention and Sealing

Corrosion Prevention 5 Viscotaq 5 Denso 4 Filoform 3

Expansion Joint Fillers

Gabion Baskets & Gabion Mattresses

Geotechnical

Ground Gas Protection

Monarflex 2 Visqueen 12 Juta 16 Cordek 5 RIW 7 Corden EPS

Grouts, Anchors & Formwork

Formwork 15 Grouts & Anchors 19

Highway Repair

Reinforcement Accessories

Wire Spacers 3 Concrete Spacers 5 Plastic Spacers 1 Tying Wire 2 Slab Accessories 5 Bolt boxes 3 Holding down bolts 1

Sealants & Adhesives

Adhesives 5 Arbo Sealants 6 BSSP Sealants 2 Everbuild Sealants 11 Expanding Foam 5 Sika Sealants 6 Fosroc Sealants 11

Site Consumables

Streetscape

Parex 4 Instarmac 3 Larsen 3 Steintec 3

Structural Waterproofing

Marine Mortar S is used for the structural repair and profiling of vertical, horizontal and overhead surfaces in marine and tidal areas which are subject to early immersion.

Marine Mortar S is a thixotropic, fibre reinforced, polymer modified, cementitious mortar with excellent cohesion for use in areas subject to early immersion. It cures rapidly to produce a high strength mortar with enhanced polymeric properties for the repair of voids in aggressive marine environments. Marine Mortar S is supplied as a two component system in pre-weighed quantities ready for on-site mixing and use, requiring no extra additions of water or aggregate and is suitable for application thicknesses up to 50mm.

View/Download Datasheet (Marine-Mortar-S-Product-Data-Sheet.pdf)

Advantages

Pre-packaged material only requiring simple mixing.
Physical properties of cured materials are similar to base concrete.
Thixotropic mortar which allows easy trowel application whilst enabling high application thicknesses in both vertical and horizontal situations.
Low shrinkage and high bond strength ensure monolithic performance of the repair.
Fibre reinforced to improve tensile and impact strength. Superior to tensile strength of concrete. Excellent low sag properties.
Dense matrix provides excellent protection against the ingress of acid gases, moisture and chlorides.
Excellent resistance to wash-out soon after application.
Economic, polymer modified, fibre reinforced cementitious repair mortar
Non toxic when cured.

Compliance

CE marked in accordance with BS EN 1504 Part 3. Fully complies with the Highways Agency Standard BD 27/86 for the repair of Highway Structures. Approved by the BBA, Certificate No. 05/4276.

Specification Clause

The repair mortar shall be a thixotropic, fibre reinforced, polymer modified, cementitious mortar, and shall be CE marked in accordance with BS EN 1504-3 Class R4. It shall be BBA Certified and comply with the following performance specification:

Compressive strength at 20°C of at least 15-20 MPa in 1 day and 50-60 MPa in 28 days
Free plastic shrinkage of no more than 0.02% at 28 days
Bond strength of 33-36 MPa in accordance with BS 6319 – Part 4 Slant Shear Method
Impermeable to water under 10 bar hydrostatic pressure such that 10mm of mortar is equivalent to 3000mm of concrete.