Mapelastic Turbo | BS Specialist Products

Concrete Repair

BSSP 10 Fosroc 18 Tarmac 4 Weber 7 DCP 6 Flexcrete 10 Ultracrete 3 Sika 4 Parex 5 Nufins 4 Ardex 6 Ronacrete 14

Concrete Treatments & Coatings

Surface Treatments 14 Concrete Coatings 15

Corrosion Prevention and Sealing

Corrosion Prevention 5 Viscotaq 5 Denso 4 Filoform 3

Expansion Joint Fillers

Gabion Baskets & Gabion Mattresses

Geotechnical

Ground Gas Protection

Monarflex 2 Visqueen 12 Juta 16 Cordek 5 RIW 7 Corden EPS

Grouts, Anchors & Formwork

Formwork 15 Grouts & Anchors 19

Highway Repair

Reinforcement Accessories

Wire Spacers 3 Concrete Spacers 5 Plastic Spacers 1 Tying Wire 2 Slab Accessories 6 Bolt boxes 3 Holding down bolts 1

Sealants & Adhesives

Adhesives 5 Arbo Sealants 6 BSSP Sealants 2 Everbuild Sealants 11 Expanding Foam 5 Sika Sealants 6 Fosroc Sealants 11

Site Consumables

Streetscape

Parex 4 Instarmac 3 Larsen 3 Steintec 3

Structural Waterproofing

View/Download Datasheet (mapelasticturbo-DATA-sheet.pdf)

Advantages

Suitable for tiling after around 4 hours in normal weather conditions and within 24 hours at temperatures down to +5°C.
Also suitable for substrates not completely dry as long as they are well cured.
Rain-fast after just a few hours, including at low temperatures and in high levels of R.H. (relative humidity).
CE marking according to EN 14891 and EN 1504-2 standards.
Resistant to UV rays.
Also suitable for overlaying existing ceramic, all types of mosaic and natural stone floor and wall coverings.
Product certified EC1 R Plus by the GEV Institute (Gemeinschaft Emissions-kontrollierte Verlegewerkstoffe, e.V.) as a product with very low emission of volatile organic compounds.

Description

Rapid waterproofing product for concrete structures, cementitious screeds and old floor and wall coverings, including at low temperatures.

Mapelastic Turbo is a two-component, cementitious binder-based mortar with fine-grained selected aggregates, special admixtures and synthetic polymers in water dispersion.