Juta GP2

JUTA GP^®2 gas barrier is a multi-layer, low-density polyethylene membrane. Reinforced with a polypropylene reinforcing grid. GP^®2 is specifically designed and manufactured to perform as a radon, air and moisture protection system, as well as low level protection to carbon dioxide and methane.

JUTA GP^®2 should be used on any site where low levels of ground gas is present up to and including CIRIA 665 SITUATION 2. The barrier is sufficiently resistant to the ingress of harmful gases into a building. On more heavily contaminated sites a passive or active venting system may be required to dilute the gases down to acceptable levels and specific design advice should be sought.

• High quality reinforced polyethylene membranes.
• Low permeability to hydrocarbon and VOC vapours, carbon dioxide, methane and radon.
• Complies with the latest codes of practice as published by the BRE and CIRIA, BS 8485.
• Independently tested by third party UKAS accredited bodies.
• BBA approved and CE marked.

This product is associated with the following NBS Create clause:

45-65-50/325 Plastics sheets

This product is associated with the following NBS clauses:

D21 Ground gas collection and venting systems

350 GAS RETARDANT MEMBRANE

J40 Flexible sheet waterproofing/ damp proofing

140 LOOSE LAID POLYETHYLENE GAS RETARDANT/ DAMP PROOFING

145 LOOSE LAID WELDABLE POLYETHYLENE GAS RETARDANT DAMP PROOFING

Ideal for all common ground floor constructions, including:

• Reinforced cast in-situ (ground-supported) concrete floors.
• Suspended beam and block concrete floors.
• Pre-cast concrete slabs.
• Can also be used above or below the slab (not subject to hydrostatic pressure).