Juta GP DPC | BS Specialist Products

Concrete Repair

BSSP 10 Fosroc 18 Tarmac 4 Weber 7 DCP 6 Flexcrete 10 Ultracrete 3 Sika 4 Parex 5 Nufins 4 Ardex 6 Ronacrete 14

Concrete Treatments & Coatings

Surface Treatments 14 Concrete Coatings 15

Corrosion Prevention and Sealing

Corrosion Prevention 5 Viscotaq 5 Denso 4 Filoform 3

Expansion Joint Fillers

Gabion Baskets & Gabion Mattresses

Geotechnical

Ground Gas Protection

Monarflex 2 Visqueen 12 Juta 16 Cordek 5 RIW 7 Corden EPS

Grouts, Anchors & Formwork

Formwork 15 Grouts & Anchors 19

Highway Repair

Reinforcement Accessories

Wire Spacers 3 Concrete Spacers 5 Plastic Spacers 1 Tying Wire 2 Slab Accessories 5 Bolt boxes 3 Holding down bolts 1

Sealants & Adhesives

Adhesives 5 Arbo Sealants 6 BSSP Sealants 2 Everbuild Sealants 11 Expanding Foam 5 Sika Sealants 6 Fosroc Sealants 11

Site Consumables

Streetscape

Parex 4 Instarmac 3 Larsen 3 Steintec 3

Structural Waterproofing

View/Download Datasheet (JUTA-GP-DPC-Ground-Gas.pdf)

Description

GP® DPC – Gas Resistant DPC is a unique single layer, embossed High-Performance DPC. GP® DPC is specifically designed and manufactured to perform as a Methane, Carbon dioxide, Radon & Moisture resistant damp proof course.

JUTA GP® DPC has an embossed surface to create superior mortar adhesion which is essential when being used in 3+ storey applications. JUTA GP® DPC is compliant to BS EN 14909:2012 and can be used in both vertical and horizontal applications.

Handling

Roll weights can be in excess of 5kg and hence appropriate care and equipment is required for unloading and handling.

Storage

Rolls of JUTA GP® DPC should be stored on stable/level ground and stacked no more than five rolls high, with no other material stacked on top. The rolls can be stored outdoors when packaged but should be protected from exposure to UV. JUTA GP® DPC is classified as non-hazardous and chemically inert such that it will not react with any acid or alkali environment in which it is used.

Accessory Products

JUTA GP® DPC is an accessory product for use in combination with GP®1, GP®2, GP®H, GP®SAM, and GP® TITANTECH gas protective membranes. It is also compatible with a range of DPM and other DPC materials.

Advantages

GP® DPC complies with the latest codes of practice as published by BRE, CIRIA and BSI (BS EN 14909 and BS8485:2015).
Suitable for use as a High-Performance DPC for vertical and horizontal applications.
Superior adhesion to mortar is essential for buildings of 3+ storey height.

Specification

Thickness	0.8mm
Width	100-1200mm
Length	20 M
Weight	730 g/m2
Water Vapour Transmission Rate	0.09 g/m2/day
Full Information	Check out the full data sheet above

Applications

Installation

JUTA GP® DPC must be installed in accordance with the guidelines laid out in BS8215:1991, BS8000: part 3 and BS 5628. It can be used in most common floor constructions and is installed in a similar manner to damp proof membrane. For external walls, the DPC should be applied 150mm above the adjoining surface and should be linked to a DPM or Gas Resistant DPM in solid floors. The DPC should be applied to a fresh bed of mortar, completely free of projections that may puncture the material or impede the DPC from lying flat.

Jointing and Sealing

Sheets of JUTA GP® DPC must be clean, dry, and free from dirt and grease before application of jointing tape. JUTA GP® DPC may also be heat welded to the underlying Gas resistant membrane.